The need for surface metrology for the CMP process is evident given that mechanical interaction between the surfaces is a critical variable for all stages of the process. The surfaces that need [...]

In this case study, Linkam and Sensofar Metrology demonstrate their collaboration in producing an experimental setup for temperature-controlled optical profilometry experiments.

We study the optical properties of QDs that are embedded in PhC cavities, leading to enhanced emission (the Purcell effect), or in WGs, producing photon multiplexing devices.

The study is based on the optical properties of QDs that are embedded in PhC cavities, leading to enhanced emission (the Purcell effect), or in WGs, producing photon multiplexing devices.

The task of this work was to build large-scale organic light-emitting diodes (OLEDs) for luminaires. This required an invisible series connection of OLEDs to reduce the device current and hence [...]

In the fabrication of nano pressure sensors for biological applications, the sacrificial layer etching and the sealing of the two membranes separated by a vacuum gap to form a Fabry–Pérot [...]

By verifying with Sensofar using the confocal technique with a 20X brightfield objective that the RF antenna’s shape was as desired and possessed an adequate silver layer, good conductivity was [...]

A sequence of wetting tests with solutions of various salt concentrations are being carried out in conjunction with opacity testing and light transmission testing to investigate the performance [...]