Non-contact measurement of aspherical and freeform optics with a new confocal tracking profiler
2003年にフルブライト奨学金を受けてカリフォルニア大学アーバイン校で大型分割望遠鏡の位相整合を研究した。\n光学測定と大型分割望遠鏡の位相整合を研究分野とし、Sensofarの研究開発グループをイノベーションと高い技術レベルで常に最先端に立つ卓越した位置付けへと導いている。
Non-contact measurement of aspherical and freeform optics with a new confocal tracking profiler full article
Agustí Pintó1, Ferran Laguarta2, Roger Artigas2, Cristina Cadevall2
1Sensofar-Tech, S.L. (Spain)
2Universitat Politècnica de Catalunya (UPC) Rambla Sant Nebridi, 10, E-08222 Terrassa, Spain
Proceedings Volume 8169, Optical Fabrication, Testing, and Metrology IV; 81690V (2011)
Event: SPIE Optical Systems Design, 2011, Marseille, France
Abstract
In this paper we introduce a new optical technique for the measurement of aspheric and free-form optics and moulds. This technique, called confocal tracking, consists on tracking the focus on the sample while it is moved along the horizontal XY axes. Unlike all single-point based techniques, confocal tracking images the surface, which makes it possible to determine the best in focus position within every field of view and to correct the residual tracking errors for each measured point.
As a result, confocal tracking provides shape measurements with nm-level accuracy and acquisition speeds of 1 mm/s typically. Depending on sample geometry, high NA objectives can be used, with which it is possible to measure slopes as high as 65°. In addition, because confocal tracking is not a single-point but an imaging technique, it is possible to center the surface to be measured with a very quick procedure that can be automated easily. This step may be particularly relevant for optics with symmetry of revolution.
The confocal tracking profiler is a proprietary technology of UPC and Sensofar and can be considered the optical equivalent of a high-accuracy contact profiler.
