Novel stent optical inspection system
2010年よりSensofarで共焦点法、干渉法、焦点移動法の開発に携わる。2018年より研究開発エンジニアリングマネージャーを務める。光学機械システム設計と画像処理に焦点を当てている。\n光工学におけるその総合的な研究活動は、Sensofarの研究開発グループをイノベーションと高い技術レベルで常に最先端に立つ卓越した位置付けへと導いている。
Novel stent optical inspection system full article
C. Bermudez,1,2 F. Laguarta,1 C. Cadevall,1,2 A. Matilla,2 S. Ibañez,3 and R. Artigas1,2
1 Center for Sensors, Instruments and Systems Development (CD6), Universitat Politècnica de Catalunya (UPC) Rambla Sant Nebridi, 10, E-08222 Terrassa, Spain.
2 Sensofar Tech SL, (Spain)
3 Sensofar Medical SL, (Spain)
Imaging and Applied Optics 2016, OSA Technical Digest (online) (Optical Society of America, 2016), paper AITh2B.3
Abstract
Stent quality control is a critical process. Coronary stents have to be inspected 100% so no defective stent is implanted into a human body. Skilled operators currently perform the quality process control visually, and every stent could need tens of minutes to be inspected.
In this paper, a novel stent optical inspection system is presented. By the combination of a high numerical aperture microscope, a triple illumination optical system, a rotational stage, and a line-scan camera, unrolled sections of the outer and inner surfaces of the stent are obtained with high resolution at high speed.
We expect with this new approach to make the stent inspection task more objective and to dramatically reduce the time and the overall cost of the stent quality control process.
References
Carlos Bermudez, Ferran Laguarta, Cristina Cadevall, Aitor Matilla, Sergi Ibañez, and Roger Artigas. Optical stent inspection of surface texture and coating thickness, Proc. SPIE 10110, Photonic Instrumentation Engineering IV, 1011007 (20 February 2017)
Carlos Bermudez, Ferran Laguarta, Cristina Cadevall, Aitor Matilla, Sergi Ibañez and Roger Artigas. Stent optical inspection system calibration and performance, 2017, Applied Optics Vol. 56, Issue 9, pp. D134-D141
