Documentation
S neox Brochure
Applications
Our products are designed to solve inspection requirements in the field of semiconductors, microelectronics, optics, and surface finishing. Covering the large markets of advanced manufacturing and consumer electronics.
Case studies
20 November, 2019
Eli Kapon and Dr. Benjamin Dwir
The study is based on the optical properties of QDs that are embedded in PhC cavities, leading to enhanced emission (the Purcell effect), or in WGs, producing photon multiplexing devices.
5 November, 2019
Joshua Fragoso
The task of this work was to build large-scale organic light-emitting diodes (OLEDs) for luminaires. This required an invisible series connection of OLEDs to reduce the device current and hence to mitigate ohmic losses. A femtosecond laser was used to selectively structure the layers.
5 November, 2019
Marta Duch
In the fabrication of nano pressure sensors for biological applications, the sacrificial layer etching and the sealing of the two membranes separated by a vacuum gap to form a Fabry–Pérot resonator is critical.
4 November, 2019
M. Teresa Flores-Arias and María Aymerich
We will perform the characterization of microchannels in this study.
4 November, 2019
Raul Garcia
Femtosecond laser is an ultra-short pulse duration laser. Until 2016, it was not possible to integrate a femtosecond laser onto a 5 axis machine. The Swiss group Georg Fischer first achieved this in 2016 thus becoming world pioneers in this technology. This development ushered in a new range of possibilities for manufacturing processes.
31 October, 2019
Roger Escudé
By verifying with Sensofar using the confocal technique with a 20X brightfield objective that the RF antenna’s shape was as desired and possessed an adequate silver layer, good conductivity was ensured.
Get answers to your questions!
Connect with an expert
Just write us an email or search for
a direct contact near you.
